SBG-1000 Installation Methods

The iPECS SBG-1000 is a Smart Business Gateway. The emphasis is on Gateway, so in this respect the key to installing an SBG is connecting the int...

How to register a WIT-400HE to the SBG

WIT-400HE registration process is not difficult, however if not followed in the logical order outlined here it can be tricky to register. If the ...

SBG-1000 Security & Remote Admin & VPN

SBG-1000 Security & Remote Admin & VPN 1. Initial Installation 1. Upgrade to the latest version of software. 2. After upgrade default the...

SBG DECT / WIFI INSTALLATION

While DECT and WiFi are only a small component of the SBG product we felt it was important to familiarise you with some of the facts about wirele...

Networking SBG with SBG via VPN (IPSec Gateway-to-Gateway Connection VPN).

Networking is only supported via VPN. NAT is not supported. From 1.0Db version, the Voice networking can be supported via the SBGs own VPN. Conne...

Networking SBG with 50B with BLF.

Networking is only supported via a Business grade secure VPN. NAT is not supported. From version 1.0Db SGB’s own VPN is supported. Connection to ...

UCS 3.0 Mobile Application Installation Instructions

UCS Mobile Client [iOS UCS Client for UCS 3.0 Server] Download a UCS Client from app-store. Go to Settings (not UCS client setting but iOS settin...

Dual-band network (Data Network/SIP Trunk Network)

In case of dual-band network (Data Network/SIP Trunk Network): You need to program the Static Route Table (PGM254) when the sip trunk use on-boar...

Konftel as SIP Extension

Note: This quick help guide was designed using an iPEC-300 (6.1Cn) & Konftel 300IP (2.4.4) on local LAN. Step 1. Install iPECS as per trainin...

How to set call charges based on time

Please use the following example as a guide to program the dialled numbers associated to a timed cost. With this procedure you Do Not need CMUs (...

How to set up a conference call if a problem occurs adding the 2nd party.

Step 1. Call 1st party Step 2. Press CONF Step 3. Try to dial 2nd Party (wrong number or abandoned call) Step 4. Hang up 2nd Party (On hook) Step...

How to Switch 2 Different DID Indials at Different Times Automatically.

The scenario is: There are 2 DID numbers ending in 200 & 201 that need to go to different messages automatically at different times. We have ...

Upgrade to Phase 6.0 Procedure

Your MFIM100,300,600 must have an Issue 3 PCB, otherwise this is not a supported/recommended procedure. MFIM Firmware version E.5Gz will not allo...

IPECS IP Communicator (Android)

Note: This quick help guide was designed using a Phase 6.0 iPEC50B on local LAN. Step 1. Install iPECS50 as per training instructions. Upgrade to...

Setting up a redundant MFIM system & how to upgrade.

MASTER  Start with 1 x iPECS MFIM 100, 300, 600 or 1200 – we shall call this MFIM the Master.  Set Dip1 off, other dips on. (Notice Master/Slav...

Registering an ACT-50 Conference room phone to iPECS LIK

Overview Due to the number of enquiries made regarding SIP extensions we have constructed this guide in order to assist you in connecting an ACT-...

Lost Password

Register